What material is good for the nipple, liquid silicone is the closest to the nipple.shower brush for skin manufacturer

　　Liquid silicone is the closest to the nipple. Silicone pacifiers are the most common and best-selling pacifier material on the market. This material is non-toxic and tasteless, and is very close to the touch of human nipples. to learn more.

　　What kind of material is the pacifier?

　　Liquid silicone is closest to the nipple. A pacifier is a tool that fits over a feeding bottle to aid in breastfeeding. In terms of raw materials, it can be divided into: silicone pacifier (transparent), rubber pacifier (yellow, and the sulfur content is very easy to exceed the standard). Silicone pacifiers are further divided into solid silicone pacifiers and liquid silicone pacifiers. Liquid silicone pacifiers are more transparent and softer than solid silicone, and are currently the most used pacifier raw materials. At present, most of the pacifiers on the market are made of silicone, and some are made of rubber. In contrast, silicone pacifiers are closer to the mother's nipple, with moderate hardness and softness, and can promote the baby's saliva secretion and help the development of the upper and lower jaw and facial muscles. , the child is easier to accept.

　　There are several pacifier materials

　　1. Rubber pacifier

　　Advantages: The texture is soft and elastic, similar to mother's nipples, and can withstand high temperatures of 105 degrees Celsius.

　　Disadvantages: It has a slight rubber smell, and it is easy to be distorted and deformed.

　　2. Silicone pacifier

　　Advantages: transparent color, no bad smell, and more similar to mother's nipple. A pacifier with the best elastic performance, better taste, soft and delicate, moderate hardness, and can quickly adapt to large temperature differences.

　　Disadvantages: thin, easy to be bitten by children. If there is any phenomenon such as scratches, dark spots, tooth marks, etc., it is necessary to replace the new pacifier in time.

　　3. Latex pacifier

　　Advantages: Latex is a pure natural green material with a light yellow surface. The latex pacifier is the closest to the mother's nipple among the three materials. It has very good elasticity and ductility, and is relatively soft.

　　Disadvantages: low heat resistance, can not withstand sun exposure, and easy to aging and damage, generally only one month of life, need to be replaced frequently.

　　How to sterilize a pacifier

　　1. Sterilization with boiling water: Before sterilizing the pacifier for newborns, the pacifier must be rinsed with warm water. Then use boiling water to sterilize the pacifier, usually after the water boils, cook for two or three minutes.

　　2. Steam sterilization: This is one of the most effective and best methods at present. Steaming the pacifier with steam at 95°C-97°C for 12-15 minutes can effectively kill most pathogenic bacteria without destroying it. The material of the nipple. There are many baby bottle sterilizers on the market that are based on the principle of steam sterilization.

　　How to clean the pacifier

　　1. Clean the bottle and nipple immediately after each feeding. When cleaning, you can dump the residual milk first, rinse it with clean water, and then use a bottle brush to clean the bottle. It is best to prepare a bottle cleaner for special use. Cleaning, in addition to the inside of the bottle, the neck and screw should also be carefully cleaned, do not miss.

　　2. When cleaning the pacifier, turn the pacifier over first and use the pacifier brush to clean it carefully. If there are coagulated milk stains on the pacifier, you can soak it in hot water for a while, and then use the pacifier brush to remove the milk stains after softening. The area near the nipple hole is relatively thin, so be careful not to crack it when cleaning.

　　3. After washing nipples and feeding bottles, they should be rinsed repeatedly with running water, and dried upside down in a ventilated place.

　　4. In addition to cleaning after each use, it also needs to be disinfected regularly. It is best to disinfect it once a day. It can be boiled in an ordinary pot with boiling water, or steamed in a steamer, or in a microwave oven, usually 8-10 minutes. That's it. The sterilizer should be dedicated, and a dedicated sterilizer can also be used.

　　5. Prepare a special sterilized cooking pot, put it in the milk bottle (at this time, put it in a glass milk bottle, and the plastic milk bottle should be placed in the pot after 5-10 minutes of boiling water), and put in an appropriate amount of water (to completely submerge all the milk) After 5-10 minutes, put in plastic products such as pacifiers and bottle caps, cover and cook for 3-5 minutes and then turn off the heat. After the water cools down a little, use a sterilized bottle clip to remove the nipple and bottle cap, and put it on a round bottle after drying.

　　6. Put the thoroughly cleaned baby bottle and nipple face down into the steam pot and steam for about 5 minutes, then take it out and let it cool.

　　7. The tableware and other supplies after daily cleaning will inevitably have residual bacteria, or the bacteria in the air will breed on the tableware and other supplies. In a wet bottle, bacteria are more likely to grow on the surface of the nipple. If this is the case for a long time, it will pose a serious threat to the baby's health. Infants and young children have weak immunity. In order to provide your baby with safe and clean feeding equipment, you will need to autoclave bottles and other aids.

Read recommendations:

What is the difference between popular science silicone products at home and abroad!baby cup silicon

Owl baby teether

Flower-shaped pacifier

wooden pacifier clip manufacturer

baby pacifier clips Processor