betta bottle nipple related questions.baby car pacifier clip manufacture

　　Why does the pacifier hold up?

　　Because the pacifier is made of silicone, the silicone material will attract each other. It is usually designed so that when the baby sucks, the air in the vent hole at the bottom of the pacifier will enter, and the opening of the vent hole will stick to the seam, which will cause the air to not circulate well, thus causing the pacifier to deflate. When cleaning the nipple, check the vent and nipple holes with your hand and a love needle, and open gently. In this way, the circulation of the exhaust hole becomes better, and it is not easy to deflate.

　　Note: Please do not puncture or tear the vent. Will leak milk.

　　Why is milk leaking?

　　The main reasons for milk leakage are 3 points:

　　1. The bottle cap is not installed correctly, or is screwed too loosely and too tightly. Due to the unique design of the betta bottle, when tightening the bottle cap ring, do not rotate too hard, this will cause excessive pressure and cause milk leakage. If the nipple is used in a wet state, there will also be milk leakage. Please use after drying

　　2. There is a problem with the vent hole at the bottom, including the vent hole staggered, the crack becoming larger, etc. In addition, there is a vent hole at the bottom of the pacifier, which can also cause milk leakage if the vent hole is blocked or stuck. Please use a love needle or a toothpick to gently open the vent to confirm the vent.

　　3. Are the pacifiers aging? It is recommended to replace the pacifier every 1-2 months;

　　Why are the scale lines inaccurate?

Read recommendations:

How to help your baby wean off a pacifier.personalized silicone pacifier clip

Beech wool pacifier chain

Lollipop baby teether

pacifier for newborn

pacifier orthodontic company