How does conductive adhesive work?baby bath silicone brush Factory

　　Now there are many people for some of the basic information of the conductive glue is not understood, so as a manufacturer, we are also necessary to explain briefly, in fact, this conductive glue is our presence everywhere, its structure is unique, in the industrial field also plays a very important role, so we must timely to understand its principle and structure, In order to be more quickly familiar with and use in operation.

　　The contact between the conductive particles forms a conductive path, which makes the conductive adhesive conductive. The stable contact between the particles in the adhesive layer depends on the hardening or drying of the conductive adhesive. Before the conductive adhesive is cured or dried, the conductive particles in the adhesive exist alone and are not in frequent contact with each other, so they are in an insulating state. After the conductive adhesive is cured or dried, due to the solvent painting and curing of the adhesive, the adhesive volume shrinks, so that the conductive particles are stable and continuous with each other, thus showing electrical conductivity. The main purpose of this is that if you do not understand the place you can call us at any time to consult, enter the official website you can see the way to contact, you can also go to consult the online staff.

　　The tunneling effect forms a certain current path between particles, and when the directional movement of free electrons in conducting particles is disturbed, this barrier can be regarded as a barrier with a certain potential energy. According to the concept of quantum mechanics, for a microscopic particle, even if its energy is lower than the energy of the barrier, it has the ability to pass through the barrier in addition to being able to reflect. It is called the penetration effect, also known as the tunnel effect. Electrons are microscopic particles and therefore have the ability to penetrate the barrier between conductive particles. The probability of electrons passing through the insulation layer is related to the thickness of the insulation layer and the difference between the barrier energy of the insulation layer and the energy of the electron. Electrons passing through the insulating layer. When the thickness of the insulation layer is small to a certain value, electrons can easily pass through this thin insulation layer, so the insulation layer between conductive particles becomes a conductive layer. The conductive layer generated by the tunneling effect can be equivalent to a resistor and capacitor.

　　Conductive adhesive production method: Conductive adhesive is an adhesive with certain conductive properties after curing or drying, it is usually based on matrix resin and conductive filler as the main components, that is, conductive particles, conductive particles are connected by the adhesion of the matrix.

Read recommendations:

What are the main factors affecting silicone kitchen utensils?baby pacifier bibs Processor

Beech wool pacifier chain

Elephant gum (three-dimensional)

baby pacifier clips manufacturer

baby pacifier newborn Vendor