There are six reasons for the poor rupture of silicone keys.

　　I. Molding temperature is too high

　　The silicone button will become brittle when the temperature is too high during molding, and it is easy to release after molding, and the cracks are poor, so that the molding temperature can be properly reduced.

　　2. Silicone peony vulcanization is not complete

　　If the temperature of the silicone button molding mold is too low or the vulcanization time is too short, the product is in close contact with the mold, it is difficult to release the mold, and it is easy to break, so it can be solved by appropriately increasing the mold temperature or extending the vulcanization time.

　　Third, the surface of the silicone button molding mold is too rough or dirt

　　The cavity with rough surface and dirt accumulation is not conducive to demoulding, and the mold that is not easy to demoulding is easy to break, so it is necessary to clean or electroplate the mold;

　　Four. The operation method of demoulding is wrong

　　Many mold workers do not have professional training when demoulding, or do not work carefully, do not follow the strict work instructions, may lead to silicon button damage. This requires professional operational skills training for staff or the development of strict work systems.

　　Five. When demoulding, the silicone key demoulding degree is not good

　　When the product breaks during the comparison process, it is necessary to spray an appropriate amount of release agent on the surface of the silicone key in order to continue production

　　Six. The button silicon used is not good

　　Some factories use poor quality peony silicon raw materials at will to reduce costs, and the peony produced is of poor quality, poor rubber material, poor toughness, and broken memory, which is very normal. To solve this problem, it is necessary to replace a good key silicone.

　　The most common maintenance of silicone keys is oil injection. After screen printing, spray PU ink. This ink is also known as hand oil. Effectively protect the text, improve the touch of the product, bring a more comfortable experience. There are other glues. Silk screen printed buttons on the ground with high purity epoxy resin. When set, it produces a transparent amber effect. The silicon button text has little risk of fraying. Of course, this peony technology is expensive, and it is mostly used for industrial peony to avoid sweat stains, chemical raw material erosion and common wear. Of course, this is how we imagine the old remote buttons to be, too.

Read recommendations:

Classification of PP milk bottles.baby bottle maker

Fish teether

Fox baby teether

baby pacifier clips wholesaler

wooden pacifier clip manufacturer