Customized production and processing of silicone products, how to solve the tear and break!Silicone Split Bottle Production

　　In many cases, the effect of choosing a silicone product is mainly the effect of the design method, but sometimes the main effect of a product may also be its appearance pattern or degree of hardness and softness. If you want to customize silicone products, you must match the degree of hardness and softness. , Many product design shapes are ideal, but when choosing the effect of softness and hardness, there are often different effects, especially for silicone products with a large right angle of special-shaped parts, several issues must be paid attention to when choosing the hardness!

　　Everyone knows that the harder the material, the more brittle it will be. If used properly, the above problems will not occur. For example, tungsten steel in steel has high hardness and is brittle. Therefore, the same phenomenon occurs in the silicone product industry. Silicone The higher the material of the product, the more likely it will become brittle. In addition, the shape of the product is very brittle, and the probability of tearing and breaking is higher. Therefore, for special-shaped silicone parts, the hardness is too high and the product is too brittle. It is the most important issue!

　　In addition, many high-hardness silicone products cannot achieve the expected effect on the self-removal of the edge. For example, the 80-degree raw material self-removal may cause the burr to break and disconnect the line during the process of removing the edge, and there are two main ones. One of the factors is that the molecular structure of silica is too dispersed due to the material of the raw material. To put it bluntly, the purity of the raw material is not high enough; !

　　However, the use of high-hardness raw materials for production customization can make different improvements. In the product mold structure, the sharp corners of the product are chamfered, and the right-angle mouth of the product is slightly improved to give a little R angle. Control the temperature, control the product to be produced within the conventional temperature range, and do not be too brittle, which can prevent the phenomenon of tearing and breaking!

Read recommendations:

How are pacifiers used?

Camouflage silicone water bottle

Silicone brush head

pacifier orthodontic manufacture

animal pacifier clip Processing