Silicone ring manufacturers analyze the production problems of O-type silicone rings!

　　As we all know, customizing a product has a difficult process from R&D to production. Silicone products are no exception. From the size and assembly of the R&D product to the selection of performance testing materials, continuous testing is required. In the production process of silicone rings There is a similar phenomenon. A troublesome process may cause different problems in the processing of a product. So what are the difficult hurdles for silicone sealants to overcome?

　　The most important thing about customizing a sealing ring for silicone products manufacturers is the product mold problem. The custom processing of small silicone sealing rings has higher requirements for self-demolition lines. Due to the small size, most small products use mechanical trimming and automatic cutting of self-demolition lines. The burrs only need to be trimmed by hand in the manual process, so the workmanship accuracy of the mold and the selection of mold steel are relatively high. In addition, the mold layout structure of the product is also very important, with clear lines and clear discharge slots. The mold is natural There will be some help in the production process!

　　The importance of raw material selection, many times the product material problem cannot be accurately predicted, because the silicone rubber ring belongs to the hollow circle with the middle part vacated, but in the production process of the silicone sealing ring manufacturer, the material needs to be put into the center point for vulcanization , so the weight of the burrs is naturally more than the weight of other products, so in many cases, if the budget is not allowed for the weight of the product, there will be price errors and product cost errors. If the hardness of the product is not selected correctly, the sealing effect will not be achieved. This is what the supplier is most worried about and what the supplier is most worried about, so proofing in advance to confirm normal use!

　　For silicone O-rings, there are many intractable diseases, and the products are used in a wide range of applications. In addition to the above problems, the adverse factors and production efficiency of the products should also be considered in the production process. Whether it can achieve the effect of use in other substances, and the main purpose of customized silicone processing is based on the needs of customers, so it depends on the field and environment in which your product is used!

Read recommendations:

How far is my country's silicon industry from the international advanced level!baby bibs silicone cu

Anti-rat pioneer educational toy

Camouflage silicone water bottle

baby pacifier clip Processing

baby pacifier feeder company