The difference between mold printing and silk screen printing of silicone products.mordedor silicone Factory

　　We all know that silicone products are a green and environmentally friendly product, which is very popular in Europe and the United States. However, some silicone products need to have some logos or patterns on the outer surface, which can leave a certain impression on consumers and deepen their brand awareness. awareness.

　　Screen printing is a post-process after the silicone product is formed. Screen printing mainly uses screen printing, which is different from mimeograph and color printing. The main tools are screen and oil printing. Screen is made of an iron frame or a wooden frame. A good pattern, and this pattern is the pattern to be screen printed on the silicone product. When screen printing products, align the screen at the plane where the product needs to be printed, apply ink on the screen, and the ink will leak from the gap of the screen pattern on the silicone product to form a corresponding pattern. Then put it in the oven to dry, and the temperature should not be too high. According to different products, the general baking time and temperature are also different. Compared with stencil printing, silk screen printing can do slightly complicated patterns, and can also perform multi-color printing.

　　Die printing is much simpler than silk screen printing. Die printing does not require a second process to be completed. It is directly formed with the product at one time. Die printing can only make some relatively simple patterns, such as logo and other patterns. The mold is ready, and it is directly formed. Screen printing and stencil printing are also different in terms of processing costs. Relatively speaking, the cost of silk screen printing is much higher. Considering the cost, the selection of the two can be made according to the complexity of the drawing.

　　About silicone products

　　The production of silicone rubber products is a complex process, and the quality is not only good or bad except for machine and human factors. Intermediate inspections are the key to finding and resolving major product quality issues. Therefore, maintaining the normal operation of the machine, the good working condition of the mold, and strengthening the operation skills and quality awareness training of operators and quality control personnel are the key to reducing production defects and the benefit of the enterprise.

Read recommendations:

Why is silicone material called food-grade silicone products?silicone baby bottle brush wholesale

Owl baby teether

Christmas tree jenga

bibs baby pacifier Processing

baby food pacifier Manufacturing