The importance of stretch and rebound, why do silicone mobile phone pendants need high tensile materials?Silicone squeeze water bottle Factory

　　It is estimated that everyone knows that silicone products have good tensile resilience. Rubber and plastic materials mainly use the tensile resilience to play the role of buffering, sealing, shock absorption, etc.! In the molding process, many products will frequently touch the requirements of stretch and rebound. In the mechanical and electronic industry, if some silicone products have insufficient rebound and poor stretching effect, the phenomenon will often seriously affect the performance of the entire product or machinery. Mechatronics, the same is true for silicone jewelry in daily life. If the stretch and rebound cannot meet the requirements, it will naturally break!

　　Silicone mobile phone pendant, as a decorative item for many mobile phones, still has a certain market demand so far, and it is basically popular in every city at present. Although it is only a decorative item of silicone pendant, it still attracts many consumers to be interested in it, and let it be What people dislike is that its stretching strength does not meet the requirements, and it will break after long-term use! So what are the main reasons for the fracture of silicone products?

　　The factors of insufficient tensile force of silicone products can be recognized from several aspects. First of all, under the premise, do you understand the performance of your product and what size needs to be matched to achieve the tensile effect. Therefore, product design and material selection are very important. You don’t need to know too much about it, every design has its rationality, but you need to be careful about the raw materials, but it depends on whether you want to stretch the length and strength of the stretch instantly or for a long time. And other factors!

　　The material can be divided into ordinary glue, gas-phase glue, high-elasticity glue, and special rubber material, etc., and if the stretchability of silicone jewelry can reach the market standard, it is basically no problem to use the raw material of gas-phase method silica gel. Well, you can achieve better results by using high-tensile rubber or special tensile rubber. If it still fails to meet your requirements, then it is necessary to confirm the problem of process selection!

　　On the other hand, it is related to the processing technology of silicone product manufacturers. Soft and brittle products have become a problem for many small silicone parts. If the machine is not properly controlled during the production process, the products may become brittle and soft at any time. The phenomenon of lack of material, so the silicone pendant has extreme requirements for the time and temperature control of the machine, try to control it within a certain range, you can maintain normal production, the gap of curing time lengthens the degree of tearing of natural products will get bigger!

　　Therefore, silicone product manufacturers concluded that in addition to using suitable rubber materials for raw materials, the control of machine and operation is also the core point of product quality!

Read recommendations:

There are several common types of silicone products suppliers.silicone bead pacifier clip diy

Corn baby teether

Bear chews jenga

baby medicine feeder nipple direct sales

baby pacifier newborn company