The self-removing edge of silicone products is like a human throat,silicone license plate mold

　　As the saying goes, if you want to do good work, you must first sharpen your tools. This sentence is true. The same is true for silicone products. You need a good mold. The quality of the mold directly affects the quality of the product itself. The self-detachable edge is the most important key point in a product.

　　The self-removing edge of a silicone product refers to a trace left on the mold in order to remove the edge material. Generally, this trace requires very fine processing. The degree of processing of different silicone products is also different, which is very precise. . Under normal circumstances, when the silicone product is released from the high-temperature molding mold, there will be some edge materials connected. These edge materials are mainly a critical point of the raw materials required by the product according to the mold under high temperature and high pressure. The critical point of this raw material cannot exceed Too much, but not too little. If it is too little, it will cause the whole product to be short of material. If it exceeds the critical point, the whole product will have too much leftover material, which will be directly extruded from the edge of the die, resulting in waste of raw materials.

　　The importance of the process of self-disassembly of raw materials is like the throat of a person, which has an extraordinary effect. If a person's throat is broken, it cannot survive, and the self-disassembly of silicone products is broken, whether it is Whether it is silicone kitchen utensils or silicone accessories, it will be a substandard product. Such a small self-demolition edge will make a product go to waste.

　　So where is the crux of the problem, the product is pressed out of the mold, of course, it has a very important role in the mold of the product, and sometimes it is caused by other reasons, but the self-disassembly of the mold itself is the most critical. If the self-removing edge of the mold is not done well, the molded silicone product will not have a good self-removing edge. In most cases, when we are making some new products or some very creative silicone daily necessities, we often ignore how to do this self-detachable edge, because when making the self-detachable edge electrode, We will think and realize according to the routine, but sometimes, the mold structure of the product will make us think differently, especially the creative silicone products. After all, this type of silicone products is a new type of product, many of older engineers are less than perfect.

Read recommendations:

Take you to understand how to deal with waste silicone rubber.shower brush for back Vendor

Octopus baby teether

Hand shape teether

Nano silver day and night pacifier

baby nipple pacifier Processing