Understand the common appearance process of silicone protective cover.silicone baby hair brush manufacturer

　　With the development of mobile phones and tablet computers, silicone protective cases are gradually becoming more and more popular. You can see the appearance of mobile phone cases in any mobile phone store, pedestrian street, and stalls. The appearance and product quality of silicone rubber products are usually treated with several common processes in the appearance process of silicone rubber products, one of which may be the effect you are using now! Let's find out together!

　　First of all, different processes of silicone appearance treatment have different effects and will naturally produce different prices. Therefore, at present, silicone protective sleeves usually use silk screen printing, pad printing and three-dimensional glue. Silk screen processing is the most common appearance treatment method. The pattern and LOGO of the product are printed, single-color, two-color or even three-color and so on.

　　The pad printing process of silicone products is more prominent. It can print hundreds of colors on the mobile phone case, and the appearance of colors can be mixed to achieve gradient effects, cross-color effects, single-point effects and other pattern effects. The picture is flat, and the surface has no bump and three-dimensional effect, but the cost is relatively high.

　　The sun pattern printing method mainly highlights the patterns and various shapes on the surface of the silicone products, which belongs to the monochromatic three-dimensional processing. This method only needs to perform the appearance processing on the mold, and process different colors in the mold core. That's it, but this process is only useful for a single color or small LOGO.

　　Epoxy injection process is currently one of the processes selected by many mobile phone silicone sleeves. It can achieve both concave and convex three-dimensional effects and a variety of color effects. At present, many mobile phone protective cases use this process to make colors and patterns. And it adjusts the injection port according to the size and color of your product. The size of the mold is limited, and it can be made about 200*200 if it is larger. If it is too large, manual processing will be slower, so the efficiency and low cost are more expensive!

　　In addition, there are many coating processes, spraying processes, calendering and fusion processes, etc., but these processing methods are not common in silicone rubber products. On the other hand, because of the complex processing and high cost, as a high-end silicone phone case !

Read recommendations:

Take you to understand the application of silicone products in the catering industry.newborn baby pa

Compass kettle flag color

Portable foldable water

pacifier chain teether ring

baby pacifier newborn Vendor