What are the main issues for the assembly of silicone seals?baby silicone bibs sales

　　Assembling a product is not a matter of familiarity. After the product is processed from the silicone product, it is used in conjunction with different structures. This process is required for each product, and the assembly effect between the silicone sealing ring product and the main product remains close. Combination can achieve good results, so it is necessary to have certain skills and precautions when installing and combining silicone products.

　　There are many cases. In many cases, the quality of a product often depends on a small detail, such as the assembly size deviation between accessories and accessories, distortion during installation, etc., so for silicone seals, whether it is a product Where is the function of the use and the final assembly molding process still needs certain precautions!

　　The general sheet of the sealing ring is used for mechanical sealing, shock absorption, blocking, etc., so it is necessary to check whether there are impurities around the product during assembly, the burrs are close to and scratched, and the face and face should be kept evenly connected, and the inclination should be kept the same size. , At the same time, in order to prevent distortion, concave and convex warping and avoid the material having a certain tightness, it must be set according to the similar size. The silicone has a certain shrinkage rate, but it has been reduced from the mold, so the overall size of the silicone sealing ring can be adjusted. Increase the size by about 2% to keep the size tightly combined and size controlled!

　　In order to prevent the sealing ring from being squeezed and offset under force, it is necessary to think about how much hardness the range of hardness can withstand, and adjust the hardness according to the sealing gap and pressure. The greater the force, the higher the hardness, and vice versa. In addition, in order to maintain a certain life for subsequent long-term use, the O-ring should avoid contact with the outside world, avoid sunlight, humidity, and places with no circulation, and adapt to the temperature between 0-150 degrees, and the same acid and alkali are not allowed. , solvent and grease and other liquid and gas contact. It is not allowed to use any ozone-generating device during installation, and it is easy to shorten the service life under long-term pressure.

Read recommendations:

How to distinguish different materials between silicone gaskets and rubber gaskets?toddler silicone

Apple pacifier

Christmas tree jenga

baby pacifier clip Processing

baby pacifier clip company