What to do if the pacifier hole is too small.baby pacifier bibs company

　　Take a pin, clamp it with pliers or scissors, put the front 1/3 of the needle on the fire and burn it red, immediately pierce the top of the nipple to make a small hole, and then use the same method to poke another 3-4 holes , You can also cut a "cross"-shaped hole on the nipple with scissors. The size of the hole should be determined according to the ability of the baby to suck. After the hole is opened, turn the bottle filled with water upside down, and it is best to drip out the water drop by drop continuously. The method of detecting the opening size of the nipple hole, when the bottle is turned upside down, the milk flows out from the nipple hole drop by drop, so that the size of the nipple hole is moderate. When the outflow of milk is straight down, the hole is too large. The hole is too small if the milk flows out after the force is thrown.

　　The size of the nipple hole is also important. If the nipple hole is too small, the following methods can be used to open the hole: 1. Use the tip of a toothpick to push the wall of the rubber nipple to make the top of the nipple protrude, and then use scissors to connect the convex part. Cut the toothpicks together, and the holes are opened. Open 2-3 holes in this way. 2. Use a sewing needle with a suitable thickness to bake on the fire first, sterilize it, and then pierce 2 to 3 holes on the nipple. 3. Use scissors to cut a cross-shaped opening on the nipple head. The size of the opening can be cut more or less as needed.

Read recommendations:

What are the difficulties in the encapsulation process of hardware silicone products?personalized si

Purse water bottle

Pyramid Stacks

pacifier chain gold Processing

pacifiers and pacifier chains